THIS IS A 3D MODEL EXPORT

Slicing settings depend on the model, especially its blocks/pyramids. For steep pyramids with gradual angles, increase perimeters or maintain shell thickness. Rotate blocks and enable supports. Settings vary by printer condition. For post-processing, use higher layers for faster printing and cover notches with colored spray.

To get started, we recommend this PRINTING SETTINGS:
• Layer height: 0,2 - 0,3 mm
• Perimeters: 2-3
• Infill: 5% (Rectilinear)
• Bottom Solid Layers: 2
• Top Solid Layers: 3
• Additional Setting: Use extra perimeters if needed, ensure minimum shell thickness, and detect thin walls (test as results vary by printer and slicer). Print external perimeters first. Adjust extrusion width to modify perimeter count in thin walls.

HOW TO 3D PRINTING - Tips & Tricks ➜
3D PRINTING TROUBLESHOOTING ➜

LAYOUT GRID

The layout grid PDF is included in the package.
It determines where each block belongs. Orientation by numbers is straightforward.

• "34" is Up
• "ᔭƐ" is Down

Additionally, each cell contains a colour number for the respective block.

Learn how to print the layout full scale with your home printer.